Show all measurements in inches only. Use metal tape for accuracy.
Always list width first (horizontal or side-to-side measurement), the length (vertical or top-to-bottom measurement).
Decide if you want to mount the blinds inside the window opening (inside mount or on the surface of the wall outside the window opening ( outside mount).
Measure as follows:
Width-
Inside Mount: Check the actual winndow opening horizontal width at least 3 different spots, use the narrowest measurement.
Outside Mount: Use a size wide enough to cover the winndow opening. If a stock size will fit, that will save you money.
Length-
Inside Mount: Measure from the top to the bottom of the opening. Caution: if you have the casement type windows with the protruding latches or cranks, these will catch on the blinds, causing damage. Mount blinds outside the window opening, or use drapes to avoid this problem.
Outside Mount: Cover the window openin, but do not allow the blind to hang below protruding window sills.
CUSTOM SIZES: When ordering custom size blinds, we require that you forward us written or FAXED confirmation within 24 hours of placing your order, otherwise we will not be responsible for the sizes that were ordered.
Show all measurements in inches only. Use metal tape for accuracy.
Always list width first (horizontal or side-to-side measurement), the length (vertical or top-to-bottom measurement).
Specify type: PAIR - 2-way draw which opens in the center, or PANEL 1-way draw (single drapery) which opens from one side.
FOR EXISTING RODS:
Measure rod face only (not around ends of rod) and give us the drapery length you desire. (ie. 4" below window sill or 1" above the floor.
WHEN NO ROD IS UP:
Measure window opening only, width first, then length.